Rechercher bateaux à vendre
Publicité

Seawind 1190 cruiser

€392 527 Prix ​​demandé: US$399 000

Présenté par:

Sail Away Catamarans Yacht Sales

Liberty Yacht Club & Marina
64 Old South River Road
Edgewater, MD, 21037
États-Unis
410-817-7030

Voir tous les bateaux de ce vendeur
 

Contacter le vendeur

X
* Nous ne pouvons pas poster votre message, veuillez svp vérifier les champs mentionnés et essayer de nouveau

Merci

Nous avons directement envoyé vos coordonnées au vendeur

La demande ne peut être terminée

Il se peut que vous ayez saisi des informations non correctes ou que le serveur ne réponde pas. Veuillez de nouveau télécharger cette page ou recommencer plus tard.

Contacter le vendeur

X
* Nous ne pouvons pas poster votre message, veuillez svp vérifier les champs mentionnés et essayer de nouveau

Merci

Nous avons directement envoyé vos coordonnées au vendeur

La demande ne peut être terminée

Il se peut que vous ayez saisi des informations non correctes ou que le serveur ne réponde pas. Veuillez de nouveau télécharger cette page ou recommencer plus tard.

Marque Seawind
Modèle 1190 cruiser
Année 2023
Condition Neuf
Prix US$399 000
Type Voile
Classe Catamarans
Longueur 11.89 m
Carburant Essence
Matériau de la coque Composite
Location Edgewater, Maryland, États-Unis
Longueur Hors Tout 11.89 m
Longueur à la flottaison 11.28 m
Bau 6.5 m
Tirant d'eau max. 2.06 m
Tirant d'eau min. 0.59 m
Déplacement (Demi-charge) 15620 livres
Surface de voile avant 258 ft²
Surface de grand-voile 634 ft²
Hauteur libre max. sous ponts 0.91 m
Type de moteur Hors-bord 2 temps
Marque du moteur Yamaha
Carburant Essence
Année du moteur 2021
Puissance 20 hp
Type d'entraînement Prise directe
Localisation Bâbord
Type d'hélice 3 pales
Matériau de l'hélice Aluminium
Type de moteur Hors-bord 2 temps
Marque du moteur Yamaha
Carburant Essence
Année du moteur 2021
Puissance 20 hp
Type d'entraînement Prise directe
Localisation Tribord
Type d'hélice 3 pales
Matériau de l'hélice Aluminium
Fabricant Sewind Catamarans
Cabines 3
Couchettes doubles 2
Lits jumeaux 1
Toilettes 1
Réservoirs de carburant 1 x 75 gal (Plastique)
Réservoirs à eau douce 1 x 185 gal (Plastique)
Réservoirs eau noire 1 x 13 gal (Plastique)
Forme de la coque Catamaran
Guindeau Guindeau électrique
Garantie de la coque 5 ans

Description

The Seawind 1190 Crusier offers performance cruising - same construction and similar mast and sails as the 1160 Lite.  However the 1190 Cruisier has the removeable rudders and offers performance sailing with dagger boards.

Base Price $337,000 Standard Inventory

SEAWIND 1190 (11.9 METRES / 39FT )

STANDARD SPECIFICATIONS AND EQUIPMENT – OWNERS 3 Cabin Version

 

  1. GENERAL: 

The 1190 has been developed to meet the evolving needs of modern sailors. The 1190 offers a low maintenance high performing 39ft catamaran with enhanced upwind performance and shallow draft capability offered through retracting dagerboards. Perfect for weekend sails and a great base to begin your offshore cruising dream!

 

  1. EXTERIOR / LAMINATE:
  • Finish: Full female molded hulls & decks, exterior gelcoat finish with molded-in non-slip surface on deck areas
  • Hull Laminate: Infused polyester resin laminate with vinylester tie layer
  • Hull Core Material: PVC closed cell foam core
  • Deck Laminate: Vacuum formed polyester resin laminate
  • Deck Core Material: PVC closed cell foam core
  • General Laminate: Vacuum formed polyester resin laminate
  • General Core Material: PVC closed cell foam core
  • Laminate specifications are certified to International CE standards
  1. MAST/BOOM/SAILS:
  • Clear anodized aluminium mast and boom. Single Spreader, 7/8 rig
  • Standing Rigging :

– Forestay 3/8 (10mm) 1 x 19 Dieform wire.

–  Sidestays 3/8 (10mm) 1 x 19 Dieform wire

–  Diamonds 5/16 (8mm) 1 x 19 Stainless Steel wire

  • Halyards:

– Main halyard:  12 mm Spectra rope : Heavy duty shackle

– Jib halyard:  8 mm Spectra rope. Heavy duty shackle

– Topping lift:  8 mm rope, Heavy duty shackle

– Boom outhaul: 10mm Spectra

  • Single line reefing, run to helm. Three reefing points with 2 reef lines

– Reef 1 & 3: 10mm rope. Leech/Clew blocks and snap shackle

– Reef 2: 10mm rope. Heavy duty shackle

  • Sheets:

– Main sheet: 10mm rope

– Main traveller: 8mm rope

– Jib sheet: 10mm rope

  • All halyards, reefing lines to be lead back to cockpit through turning blocks, rope clutches
  • Fully battened mainsail. Triple stitched reinforced construction. Leach adjustable batten end caps. Fibreglass sail battens
  • Mainsail cover with integrated lazy jack system.
  • Self-tacking headsail, curved headsail traveller track with end stops. With single line control sheet to cockpit.

 

  1. DECK EQUIPMENT:
  • Aluminum Hatches & portholes (9 in total)

– 4 x Forward Hatches 470mm x 470mm

– 2 x Mid cabin hatches 470mm x 470mm

– 1 x Port Bathroom window hatch 507mm x 377mm

– 1 x Galley window hatch 507mm x 377mm

– 1 x Aft Cabin window hatch 507mm x 377mm

  • Fiberglass Deck Hatches:

– 5 x Forward anchor & storage hatches

– 2 x Cockpit storage hatches

  • 6 x Docking cleats. Each side : bow, stern & amidships
  • 6 x Safety handles around cockpit
  • 1 x Heavy duty mooring cleat on forward walkway
  • Ventilation: 2 x forward cabin hatch vents
  • Mast base turning blocks. All halyards & sail controls to cockpit
  • 9x Rope clutches
  • Sheet winches : 1 x 40ST – 2 speed self tailing, 2 x 50ST – 2 speed self tailing
  • Stanchions/Rails: High quality stanchions, bow rails and stern rails with 3 life-lines.  With700mm high lifelines to meet CE requirements
  • 2 x transom access gates with pelican hook releases
  • 2 x side access gates with pelican hook releases
  • Aft swim ladder: folding stainless aft swim ladder

 

  1. FORWARD BEAM, CATWALK AND TRAMPOLINES:
  • Carbon reinforced fwd beam
  • Pelican striker and adjustable cable
  • 1 x Mooring plate above foredeck
  • 2 x Anchor roller under deck. Permanent stowage position for 45lb Plough (CQR/Delta type) anchor (cheeks 75mm high)
  • Catwalk in PVC foam-sandwich fibreglass
  • Light weight plastic coated open netted trampolines

 

  1. AFT BEAM AND DECK:
  • Targa Bar with curved mainsheet track and continuous line traveler control system
  • Stainless steel framed slatted seats behind aft beam
  • Full width hard top over cockpit

 

  1. STEERING SYSTEM:
  • Twin helm stations
  • 2 X 32” lightweight composite steering wheels
  • Both wheels independently linked to steering system. – system offers back-up redundancy
  • Retractable dagger boards below deck height when retracted
  • Lifting, transom hung rudders

 

  1. INTERIOR FINISH:
  • Furniture and cabin sides gloss gelcoat finish
  • Cabin top lined with light weight internally molded gelcoat liner
  • Floors: synthetic timber flooring
  • Lightweight cupboard doors and trimmings
  1. SALOON:
  • Lightweight handcrafted saloon table
  • Upholstered settee
  • Lightweight handcrafted coffee table
  • Forward aluminium opening windows
  • Saloon side windows in 8mm toughened glass
  • Tri folding cockpit doors
  • Removable low profile, helm hatches

 

  1. GALLEY:
  • Spacious galley with coordinated Polystone counter surfaces
  • Three (3) burner LPG stove, stainless steel pot holders. Flame failure device to shut off LPG immediately in event of flame going out
  • Double bowl stainless steel sink
  • Pressure fresh water system
  • Refrigerator: Front opening upright fridge with freezing compartment 80 litres
  • Under bench storage
  • Trash bin
  • LPG solenoid control in galley

 

  1. SLEEPING CABINS:
  • Light weight PVC foam cored doors on all private cabins
  • Port & Starboard fwd cabins : Each queen sized bed (2050mm x 1540mm)
  • Aft Starboard cabin : Double bed (1990mm x 1230mm)
  • Mattresses 150mm ( 6” ) foam upholstered
  • Cabins lined
  • 12volt LED lighting
  • Storage/Cupboards

 

  1. PORTHEAD:
  • Polished light weight PVC foam cored door
  • Manual toilet. Discharge via holding tank
  • Holding tank built in. Discharge pump out by shore station or directly overboard 130L
  • Pipes, skin fittings and sea-cocks are easily accessible and to meet survey requirements
  • Vanity basin with pressure water
  • Separate shower stall with wall mounted shower head & mixer tap
  • Electric shower bilge pump with direct overboard discharge
  • Large quantity cupboards / shelves to very high quality

 

  1. LIGHTING/ELECTRICAL SYSTEM:
  • High quality DC electrical switch panel with circuit breakers, LED indicator lights and voltage display
  • Marine grade tinned electrical wiring with extensive use of heat sealed connectors
  • Batteries x 2 comprising House System (270 amp hrs). One engine cranking battery – 130 amp hr heavy duty battery
  • 230amp heavy duty isolation switch
  • 12V lighting : Numerous 12V interior lamps and courtesy lights throughout including recessed lights in cockpit
  • 4 x 12V Outlets
  • CE approved navigation lights. Port & Starboard mounted on bow rails
  • Deck floodlight mounted on spreaders
  • Mast head anchor / riding light.

 

  1. PUMBING /FRESH WATER TANKS:
  • Pressure water system with water to galley and bathroom
  • Fresh water tank: 700 litres( 185gallons) rotomoulded. Remote deck filler
  • Electric fresh water pump
  • Electric bilge pumps (2) with controls integral with master battery switch panel
  • Manual bilge pumps (2) in each hull
  • Marelon through-hull fittings to CE/ISO standard
  • Manual toilet in head
  • 1 x LPG bottle – 4.5kg
  • Fresh water tank gauge

 

  1. ENGINES:
  • Twin lightweight Honda 20hp 20” engines. Mounted under each helm seat at each steering station
  • 5” leg extensions added to engines to reduce cavitation
  • Remote electric key start with electric tilt fitted
  • Dual engine controls at port helm station
  • 270l fuel tank mounted in external locker fwd of mast

 

  1. NAVIGATION:
  • Twin steering compasses

 

  1. ANCHORING /MOORING:
  • Primary anchor is 45 lb CQR anchor type with 55 mtrs x 8mm short link galvanised chain and 40 mtrsx 16mm triple braid anchor warp
  • Primary anchor is stored in a specially designed anchor roller under the forward beam
  • 3 x PVC Inflatable Fenders
  • 3 x Mooring lines (each 15 metres x 14mm)

 

  1. ANTIFOULING / STRIPING:
  • Epoxy barrier coat plus 2 coats of high quality black antifouling bottom paint
  • Seawind 1190 decal on each hull and stern

 

 

DISCLAIMER: The specifications above may change at Seawind Catamaran’s discretion.

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Montre Plus…

Présenté par:

Sail Away Catamarans Yacht Sales

Liberty Yacht Club & Marina
64 Old South River Road
Edgewater, MD, 21037
États-Unis
410-817-7030

Voir tous les bateaux de ce vendeur
 

Contacter le vendeur

X
* Nous ne pouvons pas poster votre message, veuillez svp vérifier les champs mentionnés et essayer de nouveau

Merci

Nous avons directement envoyé vos coordonnées au vendeur

La demande ne peut être terminée

Il se peut que vous ayez saisi des informations non correctes ou que le serveur ne réponde pas. Veuillez de nouveau télécharger cette page ou recommencer plus tard.

Présenté par:

Sail Away Catamarans Yacht Sales

Liberty Yacht Club & Marina
64 Old South River Road
Edgewater, MD, 21037
États-Unis
410-817-7030

Voir tous les bateaux de ce vendeur
 

Contacter le vendeur

X
* Nous ne pouvons pas poster votre message, veuillez svp vérifier les champs mentionnés et essayer de nouveau

Merci

Nous avons directement envoyé vos coordonnées au vendeur

La demande ne peut être terminée

Il se peut que vous ayez saisi des informations non correctes ou que le serveur ne réponde pas. Veuillez de nouveau télécharger cette page ou recommencer plus tard.

Services

Publicité
X