Rechercher bateaux à vendre

Bamba 50

€1 444 437 Prix ​​demandé: US$1 765 708

Présenté par:

Aeroyacht Ltd.

Aeroyacht Ltd. office: 75 Van Brunt Manor Road
Setauket Harbor, New York, 11733
États-Unis
Voir tous les bateaux de ce vendeur

Contacter le vendeur

X
* Nous ne pouvons pas poster votre message, veuillez svp vérifier les champs mentionnés et essayer de nouveau

Merci

Nous avons directement envoyé vos coordonnées au vendeur

La demande ne peut être terminée

Il se peut que vous ayez saisi des informations non correctes ou que le serveur ne réponde pas. Veuillez de nouveau télécharger cette page ou recommencer plus tard.

Contacter le vendeur

X
* Nous ne pouvons pas poster votre message, veuillez svp vérifier les champs mentionnés et essayer de nouveau

Merci

Nous avons directement envoyé vos coordonnées au vendeur

La demande ne peut être terminée

Il se peut que vous ayez saisi des informations non correctes ou que le serveur ne réponde pas. Veuillez de nouveau télécharger cette page ou recommencer plus tard.

Marque Bamba
Modèle 50
Année 2011
Condition Occasion
Prix US$1 765 708
Type Bateau à moteur
Classe Voiliers mixtes
Longueur 15.24 m
Carburant Diesel
Matériau de la coque Composite
Location La Rochelle, France
Statut en matière fiscale Taxe non applicable

Description

5692240

Montre Plus…

BAMBA 50': General Inventory & Specifications

Specifications
Length 14.98m
Beam 6.90m
Net displacement 19,000 kg
Gross displacement 22,000 kg
Air draft 5.90m
Air draft with mast 18.90m
Engines 2 x 150hp
Generator 9.5kW
Diesel fuel tank 4,000 litres
Water tank 900 litres
CE certificatation (in progess) CE A 10
Architects
Joubert-Nivelt
Design and build
Bamba Yachts
Project Management
Yacht Concept
Description:
Construction
Made from polyester sandwich with PVC core, balsa core on the upper works to limit deformation
The hull is painted with Awlgrip lacquer
Interior backing moulds for heads and fittings
External fittings and equipment:
Fly bridge
Accessible via outside stairway on the starboard side and inside companionway to the helm position. Solid teak flooring is used for the sole and stairway, and white PVC for the riser.
-Helm position
- stainless steel wheel
- 2 engine control panels
- electronic twin engine control lever
- marine compass
- electric controls (lights and table)
- 1 x two-man helmsman seat
-Companionway Plexiglas sliding hatch door with polished steel lock and reinforced frame
-Fly bridge saloon
- bench seat with Sunbrella upholstery
- satin-varnished solid teak table with electric lift
-Galley area in painted laminate and satin-varnished solid teak
- sink with hot and cold mixer tap
- 5kW flat-top gas grill
- 20 litre refrigerator
Bamba Yachts/Description Bamba 50’ N° 01 Page 2
-Fixed polished stainless steel Bimini top with Sunbrella roof and central opening, polished steel support brace
-Plexiglas windscreen with polished stainless steel framing
-Storage space
- 1 saloon under-seat storage locker
- 1 x 2-door stowage space in coaming on exterior galley side
- 1 x 2-door stowage space under helmsman's seat
-Equipment
- 1 Nemo stainless steel porthole to inside galley
- pulpit and pushpit with removable polished steel gate and stanchions, allowing two safety configurations, with or without the tender
- Opacmare davit (500kg load capacity)
- 2 supports for 8-seat tender
- 1 painted aluminium mast foot
- 3 pad eyes and lacing eye for genoa sheet blocks
- 3 running lights
- 1 stainless steel boat flagstaff
- 1 foghorn
- 2 stainless steel deck hatch covers
- 2 engine compartment ventilation grilles
- 1 x 230V power socket
- 2 Bose speakers
-Lighting
- halogen cable spotlights (10)
- courtesy lighting (5)
- 1 remote-controlled searchlight
- Under-spreader deck lighting (2)
-Mast and rigging
- 1 x 16m Sparcraft mast with single spreader and triangulation cabling, 1x12mm forestay and 2x14mm cap shrouds, two halyards, one winch
- 1 Profurl electric genoa furler, control on fly bridge
- 2 manual Andersen 52 ST sheet winches
- 1 x 300gr/m² 100m² genoa by Incidences
- 2x16mm sheets
Deck and fore gangway
Access via two non-slip stairways
- 4 deck fills for diesel fuel tanks in first step
- bulwark topped with polished stainless steel pulpit with intermediate stainless steel guard rail
- Anchoring and mooring
- double stemhead roller
- 1 Lofrans 2000W windlass with two gypsies and one winch
- controls in anchor locker
- 1 windlass remote control
- 1 Cobra 35kg anchor
- 50m of 12mm chain
- 100m anchor warp
room for second anchor
- 8 fenders
- 100m mooring rope
-Stowage
- anchor locker with access ladder
- 2 windscreen wash reservoirs with electric pumps
- 2 x fender stowage lockers
-Deck equipment
- 1 forestay attachment
- 4 hawseholes with rollers
- 2 sampson posts
Bamba Yachts/Description Bamba 50’ N° 01 Page 3
- 2 deck hatches
- 2 grab rails
- 1 drain plug for sewage tank
- 1 pressurised seawater outlet under one hatch cover on front of deckhouse
- 2 freshwater deck fills
- 2 coamings to prevent water ingress
all metalwork, including locks, in polished stainless steel
-Lighting
- courtesy lighting (15)
Aft gangways
All gangways as well as the top of the bulwark are in solid teak.
-Doors and hatch covers
- 2 gangway doors with seating points for swim ladder in the door sill
- 2 transom doors
- 1 access door to starboard equipment room
- 1 access hatch to port equipment room
- 2 hatches to engine compartments
- 1 drain plug for black water tank
- 1 pressurised seawater outlet under one hatch cover on port side
all locks in polished stainless steel
-Stowage
- 2 gas stowage spaces (13kg) and manual drainage pumps
- 2 rear lockers
all metalwork in polished stainless steel
-Equipment
- 2 handrails on deckhouse
- 2 handrails on access stairway to fly bridge on starboard side
- 4 sampson posts
- 2 reinforcing supports for genoa sheet blocks
-Lighting
- by spotlight (4)
- courtesy lighting (6)
-Other
- Bose speakers (2)
- security cameras (2)
Aft deck space
The whole of the deck as well as the upper side of the bulwark are in solid teak.
-Transom opens with electric jacks via key-operated control
-Stowage space
- 1 locker
- 1 stowage space for life raft with trapdoor under nacelle and pin discharge system
all metalwork in polished stainless steel
-Equipment
- 1 Lofrans 1200w winch
- 2 foot pedals
- 1 outside shower unit with hot and cold water
- 1 power inlet for quayside extension lead
-Lighting
- by spotlight (2)
- courtesy lighting (3)
-Aft platforms
- 2 chain plates for shrouds
- 2 cleats
- 2 deck inspection plugs for emergency tiller access
- 2 supports for swim ladder on starboard side
- 1 wide swim ladder with teak rungs
Bamba Yachts/Description Bamba 50’ N° 01 Page 4
- 1 fixed safety ladder on port side
- 4 ventilation grilles from equipment rooms
all in polished stainless steel
Interior fixtures and fittings
General
All floorboards are of wenge laminate, head lining of white matt PVC with satin-varnished teak beams
Finished in beechwood and satin-varnished teak and dark blue matt PVC fabric
Access via gangways, opposite gangway doors
-Sliding glass doors in white lacquered aluminium, sealed unit laminated double-glazing
-Woodwork
- hanging space and panelling finished in satin-varnished beech, and satin-varnished teak shelf
- aft cabin access door in satin-varnished beech
- wardrobe door, electrical switchboard and panelling finished in satin-varnished beech
- bar in satin-varnished teak and dark blue matt PVC fabric, satin-varnished wenge tray top
- access door for galley waste chute bag change
-Fixtures and fittings
- fabric curtains with rings on curtain pole
- Sony 37” LCD TV
- Bose home cinema system
- 4kW warm air heater
- 2 x 230V power sockets
- satin stainless steel handrail leading to helm position
-Lighting
- 1 hanging space indirect light fixture
- 2 uplighters
- 3 spotlights above bar
- night lighting (3)
Saloon
Satin-white painted backing mould
Laminated 10mm glazing
Seating upholstery by Alcantara
-Woodwork
- two-position satin-varnished teak table with laminated glass
Electric lift moves table from low position up to dining position and provides rotation through 90°
- bookshelf fiddle in satin-varnished teak
- finished in satin-varnished teak
- cornice lighting in satin-varnished wenge
-Fixtures and fittings
- locker under saloon seating
- venetian blind in stained wenge
- inside and outside lighting control
- warm air heating control with thermostat
- key-operated saloon table control
- 1 x 230V power socket
-Lighting
- 2 spotlights over saloon table
- 1 x indirect lighting panel
- night lighting (2)
Galley
Satin-varnished backing mould
10mm laminated glazing
-Woodwork
- satin-varnished teak front for dishwasher
- refrigerator cabinet, oven and storage drawers in satin-varnished teak
Bamba Yachts/Description Bamba 50’ N° 01 Page 5
- kitchen wall unit with extractor hood and 2-door storage in satin-varnished teak
- finished in satin-varnished beech, satin-varnished teak frame for fruit net
- finished in satin-varnished teak
- satin-varnished wenge cornice lighting
-Fixtures and fittings
- type 316 satin stainless steel work surface with moulded sink and drainer
- stainless steel waste chute
- satin stainless steel flexible mixer tap
- satin stainless steel soap dispenser
- Siemens 3-burner gas hob, including wok burner
- stainless steel fiddle with pot grids
- under-sink storage
- dishwasher for 10 place settings
- 204 litre Bosch refrigerator with ice compartment
- Whirlpool combination microwave and fan oven
- Siemens 700m³/hour extractor fan, ducted outside
- fruit net by fly bridge porthole
- satin stainless steel towel rail
- venetian blind in stained wenge
- galley lighting control
- fuse box for electrical appliances
- 3 x 230V power sockets
-Lighting
- two spotlights in extractor hood
- 1 x indirect lighting panel
- night lighting (2)
Helm Position
Backing mould painted in satin grey and white
Laminated 10mm glazing
Seating upholstery by Alcantara
-Woodwork
- satin-varnished teak instrument panel shelf
- satin-varnished teak chart table with storage space inside
- tread of companionway stairs to hulls are of satin-varnished wenge with fiddles
- satin-varnished teak stowage space under helmsman's seat
- companion's seat in varnished-satin teak trim and dark blue matt PVC
- aluminium fly bridge companionway with satin-varnished teak trim
- finished in satin-varnished teak
- indirect lighting with satin-varnished wenge panel
-Helm position
- stainless steel wheel
- 2 engine control panels
- 1 electronic twin engine control lever
- electric controls
- marine compass
- 4 synchronised windscreen wipers with windscreen washer
- distribution panel
-Fixtures and fittings
- 1 x two-man helmsman's seat with adjustable back
- 1 chart table swivel chair with satin stainless steel base
- 1 x two-man companion's seat with adjustable back
- companion's seat freezer locker
- white PVC black-out blinds and flyscreens on hatch covers
- 2 Bose speakers
- 2 x 4kW warm air heaters
- 1 satin stainless steel handrail at helm position
- 1 satin stainless steel handrail for fly bridge companionway
Bamba Yachts/Description Bamba 50’ N° 01 Page 6
- 3 x 230V power sockets
- Ventilation via polished stainless steel Nemo deck hatch covers
-Lighting
- 4 spotlights
- 1 x indirect lighting panel
- 1 chart plotter
- night lighting (4)
- fly bridge companionway night lighting (10)
Port and starboard companionways to hulls
Backing mould painted anthracite grey and satin white
1 Nemo polished stainless steel round porthole
Seating upholstery by Alcantara
-Woodwork
- satin-varnished one-door unit
- satin-varnished wenge companionway stairs
- finished in satin-varnished teak
- access trapdoor to water tank
-Fixtures and fittings
- 1 x two-man seat
- satin stainless steel handrail
- two-way switch lighting control
-Lighting
- 1 spotlight
- 1 cornice lighting panel
- companionway night lighting (4)
Port and starboard double cabins
Access via satin-varnished teak door
Backing mould painted anthracite grey
2 Nemo polished stainless steel portholes
Double bed with slatted base (140cm x 195cm)
-Woodwork
- 1 x one-door hanging unit in satin-varnished teak
- 1 x two-door wall unit in satin-varnished teak
- small satin-varnished teak writing area
- 2 shelves with satin-varnished wenge fiddles
- finished in beech, satin-varnished teak and matt white PVC
- satin-varnished teak fiddle
- access trapdoor to bilge pump
- access trapdoor to diesel fuel tank
-Fixtures and fittings
- mattress
- black-out curtain and porthole flyscreens
- 1 large mounted mirror
- satin stainless steel handrail
- two-way switch lighting control
- 2kW warm air heater
- warm air heating control with thermostat
- 1 x 230V power socket
-Lighting
- 1 spotlight
- 1 x cornice lighting
- 2 reading lights
Port-side forward head
Access via satin-varnished teak door with gloss gelcoat on one side
Backing mould with gloss gelcoat
Bamba Yachts/Description Bamba 50’ N° 01 Page 7
1 Nemo polished stainless steel porthole
1 Nemo polished stainless steel hatch cover (fire exit)
1 Goiot escape hatch under nacelle
-Woodwork
- 1 x one-door satin-varnished teak storage unit
- 1 x three-door satin-varnished teak storage unit
- 2 satin-varnished teak cabinet doors hide washing machine
- satin-varnished teak shelves and fiddles
- sink work surface and shelf in synthetic resin
- removable teak shower duckboard
- toilet flooring in teak with black caulking
- access trapdoor to lifting pump and crash box seacock
- shower screen fitting in teak
- finished in matt white PVC
-Fixtures and fittings
- electric toilet with 110 litre holding tank
- 4.5kg Bosch washing machine
- built-in basin with mixer tap
- mirrored unit door
- built-in shower with thermostatic mixer tap
- waste water viewing window with lifting pump
- laminated shower screen and PVC curtain on satin stainless steel curtain pole
- bathroom accessories
- porthole and hatch cover curtains
- satin stainless steel handrail
- lighting control outside
- 1 x 230v power socket
- 2kW warm air heater
- warm air heating control with thermostat
- thru-hull, stop valves and ferrules in type 316 stainless steel
-Lighting
- 3 waterproof spotlights
Forward cabin
Access via satin-varnished teak door
Backing moulds painted satin-white
1 Nemo polished stainless steel porthole
1 Nemo polished stainless steel hatch cover (fire exit)
1 Goiot escape hatch under nacelle
2 single-berth bunks (75cm x 190cm)
-Woodwork
- 1 x one-door hanging unit in satin-varnished teak
- 3 x one-door storage fronts in satin-varnished teak
- 2 satin-varnished wenge shelves with fiddles
- finished in matt white PVC
- satin-varnished teak fiddle
- access trapdoor to crash box seacock
- locker storage cover under berth
- locker storage cover under sole (electronic probe and wine cellar)
-Fixtures and fittings
- mattresses
- satin stainless steel handrail
- black-out curtain and flyscreen on porthole and hatch cover
- lighting control
- 2kW warm air heater
- warm air heating control with thermostat
-Lighting
- 1 spotlight
Bamba Yachts/Description Bamba 50’ N° 01 Page 8
- 2 reading lights
Aft cabin
Access via satin-varnished beech door
White lacquered aluminium sliding window, sealed unit laminated double-glazing
4 x 7mm laminated windows
Seating upholstery by Alcantara
-Woodwork
- 1 x one-door hanging unit, rounded door in satin-varnished teak
- 1 pull-down bed with drawers and slatted base (160cm x 200cm)
- 2 x one-drawer bedside units in satin-varnished teak
- 1 x two-door storage unit in satin-varnished teak
- 1 x four-drawer unit in satin-varnished teak
- 1 satin-varnished wenge shelf
- 2 satin-varnished wenge bookshelves with fiddles
- satin-varnished wenge cornice lighting
- satin-varnished teak fiddle
- finished in beech, satin-varnished teak and matt blue PVC
- access trapdoor to winch motor
- satin-varnished wenge steps to bathroom
-Fixtures and fittings
- mattress
- 1 fixed armchair
- fabric curtains on curtain pole for windows
- satin stainless steel handrail
- bathroom step handrail
- remote helm display screen
- two-way switch lighting control
- 4kW warm air heater
- warm air heating control with thermostat
- 2 x 230V power sockets
-Lighting
- 5 spotlights
- 1 x cornice lighting
- 2 bedside uplighters
Aft cabin head
Access via two steps and door in satin-varnished teak
Backing mould with gloss gelcoat
1 white-lacquered sliding porthole
-Woodwork
- 1 x one-door satin-varnished teak storage unit
- satin-varnished teak shelves and fiddles
- basin work surface and shelf in synthetic resin
- removable teak shower duckboard
- toilet flooring in teak with black caulking
- shower screen fitting and shelf in teak
- finished in beech, satin-varnished teak and matt blue PVC
-Fixtures and fittings
- electric toilet with 80 litre holding tank
- built-in basin with mixer tap
- mirror
- built-in shower with thermostatic mixer tap
- laminated shower screen
- bathroom accessories
- porthole curtain
- satin stainless steel handrail
- lighting control outside
Bamba Yachts/Description Bamba 50’ N° 01 Page 9
- 1 x 230v power socket
- 2kW warm air heater
- warm air heating control with thermostat
- thru-hull, stop valves and ferrules in type 316 stainless steel
-Lighting
- 3 waterproof spotlights
Port and starboard engine compartments
Access via gangway hatches
Soundproof hatch covers with stainless steel gas struts
-Equipment
- aluminium access ladder
- aluminium flooring with access trapdoor to bilge pumps
- Racor fuel filter + Iveco filter-separator
- seawater filter
- diesel transfer pump with fuel tank selection
- extraction blower
- engine control servomotor
- diesel pull cord shut-off on outside (4)
- fire extinguisher with control outside
-Lighting
- 2 waterproof strip lights
-Engine
- Iveco NF150 6.7 litre diesel engines, 6 cylinders in line, 110kW at 2800 rpm
- stainless steel engine shaft and 4-bladed fixed propeller
- 12v 90Ah alternator
-Fuel tanks
- 2 x 600 litre aluminium tanks in the engine compartments
- 2 x 1400 litre aluminium tanks under cabin berths
- electric fuel gauge indicators
- port-side engine stop valve with remote control
- generator stop valve with remote control
- starboard-side engine stop valve with remote control
- boiler stop valve with remote control
Port-side equipment room
Access via gangway hatch
-Equipment
- stratified polyester step
- access trapdoor for engine inverter
- access trapdoor for PSS rudder glands
- engine battery in waterproof housing and battery switch
- waste water viewing window and lifting pump
- seawater pump
- freshwater water pressure system
- 80 litre holding tank
- 60 litre hot water cylinder
- diesel boiler
- selector and distribution valves
Thru-hull, stop valves and ferrules in type 316 stainless steel
-Lighting
- 1 waterproof strip light
Starboard-side equipment room
Access via rear door on starboard side
-Equipment
- aluminium access ladder
- access trapdoor for engine inverter
Bamba Yachts/Description Bamba 50’ N° 01 Page 10
- access trapdoor for PSS rudder glands
- engine battery in waterproof housing and battery switch
- service battery in waterproof housing and generator battery switch
- charging converter
- load sharer
- watermaker
- workbench in varnished ply
- varnished ply shelf
Thru-hull, stop valves and ferrules in type 316 stainless steel
-Lighting
- 2 waterproof strip lights
Electronics
-Navnet 3D
- Furuno MFD8 multifunction display screen at helm position
- Furuno MFD12 multifunction display screen on fly bridge
- remote 8” display screen in aft cabin
- remote nacelle LCD display screen
- power connection at chart table
- USB socket at chart table and on fly bridge
-Furuno radar
- 60cm DSR4D 4kW Radome antenna
-Furuno GPS
- GP 32
-Furuno automatic pilot
- 2 x Navpilot 511 at helm position and on fly bridge
- processor unit
- PG500 electronic compass
- rudder angle transmission unit
- Seimi hydraulic unit
-Furuno anemometer
- F 150 FI-501 analogue wind angle indicator
- Rowind wind measurement sensor
- mast-head sensor
-Furuno depth sounder
- Navnet DFF1 digital network sounder
- 600W bronze probe triducer
-Communication equipment
- VHF Icom IC-M505 at helm position
- HM-162 command mic on fly bridge
- 6db 2.4m antenna on support braces
- masthead antenna
- wireless antenna
Electrical
-Equipment
- 2 x 90A engine alternators
- 4 x 50W solar panels
- load sharer
- 1 x Optima 50 A starting battery for port-side engine
- 1 x Optima 50 A starting battery for starboard-side engine
- 4 x AGM 200 A service batteries
- 3 remote-controlled battery switches
- emergency engine battery coupling at helm position
- Victron 120A 3kW charger inverter
- Onan 9.5kW generator
- 32A dockside power inlet with 15m extension lead
Bamba Yachts/Description Bamba 50’ N° 01 Page 11
- switchgear systems and distribution panels with 12V circuit breaker, running light control and alarm, windscreen wiper synchronisation
- switchgear systems and distribution panels with 230V circuit breaker
Plumbing
-Equipment
- 2 x 480 litre aluminium tanks
- gauges and instruments
- HRO 1160-2 watermaker, 183 litres/h
- stainless steel water pressure system 40 litres/min with 20 litre tank
- 60 litre hot water cylinder 230V 800W on boiler
- hot and cold water distribution system
- waste water lifting pump
- 110 litre holding tank and 80 litre waste tank with deck outlet and gravity-feed
- automatic seawater pump 12 litres/min
- seawater distribution system
Heating/air conditioning
-Equipment
- Erberspacher hydronic 30 boiler
- 4 x 4kW warm air heaters
- 5 x 2kW warm air heaters
- heating distribution circuit
Drainage
-Equipment
- 4 Attwood electric pumps 90 litres/min
- automatic control via membrane switch
- 2 manual pumps, operable from outside
- 3-way switch
- 4 strainers with valve
In option
-foredeck and bulwark in teak
-marine chiller
Warranty:
12 month shipyard warranty
Additional warranty
60 month “Yacht Guard zone Europe” cover
Leadtime:
Six months from receipt of order

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Présenté par:

Aeroyacht Ltd.

Aeroyacht Ltd. office: 75 Van Brunt Manor Road
Setauket Harbor, New York, 11733
États-Unis
Voir tous les bateaux de ce vendeur

Contacter le vendeur

X
* Nous ne pouvons pas poster votre message, veuillez svp vérifier les champs mentionnés et essayer de nouveau

Merci

Nous avons directement envoyé vos coordonnées au vendeur

La demande ne peut être terminée

Il se peut que vous ayez saisi des informations non correctes ou que le serveur ne réponde pas. Veuillez de nouveau télécharger cette page ou recommencer plus tard.

Présenté par:

Aeroyacht Ltd.

Aeroyacht Ltd. office: 75 Van Brunt Manor Road
Setauket Harbor, New York, 11733
États-Unis
Voir tous les bateaux de ce vendeur

Contacter le vendeur

X
* Nous ne pouvons pas poster votre message, veuillez svp vérifier les champs mentionnés et essayer de nouveau

Merci

Nous avons directement envoyé vos coordonnées au vendeur

La demande ne peut être terminée

Il se peut que vous ayez saisi des informations non correctes ou que le serveur ne réponde pas. Veuillez de nouveau télécharger cette page ou recommencer plus tard.

Publicité

Services

Publicité
Publicité

 

X
Votre message a été envoyé avec succès

Nous avons directement envoyé vos coordonnées au vendeur

Bateaux similaires

Poursuivre la recherche
Votre message a été envoyé avec succès

Merci. Nous avons envoyé votre demande directement aux vendeurs